The post 1971-79 VW bus master cylinder 211611021A 24mm appeared first on Wagenswest.

These stickers are (UV Coated) and for exterior use.

5” Inches long by 2.75” Inches tall.

The post Wagenswest 2020 Bumper sticker vinyl UV coated 5″x2.75″ appeared first on Wagenswest.

This is a must, when it comes to slamming a split bus. Not raising the steering box when going lower then 3.5″ inches is hazardous. So with this kit you remove a section of the pedal cluster frame at the factory welds. Then fit and weld this new frame section in.

Comes with what is shown in the photos, like a new frame section and brake pedal arm with sealed ball bearings.  An upgrade from stock, the old brass and solid shaft setup.

The post 1.25″ Steering box raise kit, for 1955-67 Volkswagen buses appeared first on Wagenswest.

Part number 211-401-311 VW bus beam bushing set. These are a direct replacement for the stock bushings, in OEM beam tubing.

Also right for 1964-67 inner bushings.

CNC machined by Wagenswest, from solid Delrin.

Precision cut, with a lubrication, grease spiral .

Made to shrink fit, into stock tube with minimal reaming.

The post 211-401-311 VW bus 1955-63 beam bushings set of 8 appeared first on Wagenswest.

The post Wagenswest, 55-70 bus master conversion spacer bracket appeared first on Wagenswest.

The post 1955-67 stock VW bus frontend rebuilt beam appeared first on Wagenswest.

This is a service!

Send us your stock Volkswagen bus spindles and a set of 944 Porsche spindles. With these two sets, we make  Bus/Porsche hybrid dropped spindles. We also rebuild the king pins, on link-pin spindles.

The whole idea is that you will have a set of new  drop spindles that use stock Porsche disc brakes.

Drop heights available are

3″ inch

4″ inch

5″ inch

6″ inch

After selecting the drop height and  placing the order, box and ship us the two core sets of spindles. Also please include a copy your order, that will be sent to your email address.

The post 1955-79 Porsche to VW bus hybrid dropped spindles – SERVICE appeared first on Wagenswest.

Wagenswest bus beam adjusters are Drop forged out of 4140, with big beefy teeth to insure a solid grip with no slip.

This adjuster fits

Volkswagen bus from beams from 1949-1979. These  are by far the strongest bus beam adjuster that can be found. This is a project for someone that is a a descent welder and prepared to do some drilling, cutting, grinding, smacking and welding. So if you do not weld it is necessary to find someone who does, and show them the how to linked below so they understand what there in for.

These are sold each and you will need 2 of them to do one beam.

HOW TO INSTALL THESE ADJUSTERS.

The post 1955-79 Wagenswest Beefcake bus beam adjuster appeared first on Wagenswest.