6 month lead time.

The post Wagenswest complete 1968-79 Volkswagen Bus suspension package Porsche 130 mm . appeared first on Wagenswest.

The post 1964-67 Volkswagen bus link pin kit 211498041A appeared first on Wagenswest.

HOW TO INSTALL WAGENSWEST ADJUSTABLE SPRING PLATES

The post 1968-71 Volkawagen bus adjustable rear spring plates appeared first on Wagenswest.

The post Wagenswest T shirt appeared first on Wagenswest.

Thanks Nate @ Wagenswest

Testing the switches on Bob P”s 1967 13 window, deluxe VW bus. from Wagenswest on Vimeo.

The post Wagenswest complete split air ride suspension 1955-67 VW bus appeared first on Wagenswest.

(a little trimming of the dust plate, is the exception)

These spindles add a 1/2 inch to your track width, per side.

Approximate 3 week wait.

No core charge any more, this is an out rite price.

These are built out of original German spindles on Wagenswest custom jigs, Quality re-built in the USA

1968-70 spindles are drum — 1971-72 are disk with a 12mm caliper bolt thread
— 1973 -79 are disk with a 14mm caliper bolt thread.

Please understand that we build these kits, in our shop and usually assemble to order – as they come in, and you may have to wait a week or more. If you want to know how long just email us.

Thanks Nate @Wagenswest

The post 1971-72 ball joint bus, 2.5″ inch dropped spindles appeared first on Wagenswest.

These spindles add a 1/2 inch to your track width, per side.

Approximate 3 week wait.

No core charge any more, this is an out rite price.

These are built out of original German spindles on Wagenswest custom jigs, Quality re-built in the USA

1968-70 spindles are drum — 1971-72 are disk with a 12mm caliper bolt thread
— 1973 -79 are disk with a 14mm caliper bolt thread.

Wagenswest started making these drop spindles many many years before the large companies came along and flooded the market with poor quality imported sketchy junk spindles. We still make them, with attention to quality and geometry, 2 things the other companies seam not to care about. This quality thing, is why Wagenswest has decided to stay small and focus on making parts that work good. We build these spindles in house and typically you can expect a 2 to 3 week wait to get a set after you order. THANK YOU!

Please understand that we build these kits, in our shop and usually assemble to order – as they come in, and you may have to wait a week or more. If you want to know how long just email us.

Thanks Nate @Wagenswest

The post Wagenswest 1973-79 Volkswagen bus ball joint, 2.5″ inch dropped spindles VW appeared first on Wagenswest.

The kit comes with what you see in the photos, including 4 piston Wilwood calipers, new wheel bearings, new rotors, seals, bolts, mounts and brake line adapters.

Bolt pattern is 5 on 130mm Porsche.

Caliper color choice is gray or red

Bolts directly to dropped or stock 1955-63 bus spindles

Built by us ‘Wagenswest’ in our shop on our Equipment.

Please understand that we build these kits, in our shop and usually assemble to order – as they come in, and you may have to wait a week or more. If you want to know how long just email us.

Thanks for supporting us, Nate @ Wagenswest

The post 1955-63 VW bus to Porsche 944 style vented disc brake kit appeared first on Wagenswest.

The post Porsche 944 disc brakes to VW bus stretched billet grease caps. 77405691C, 477405692C appeared first on Wagenswest.

Wagenswest, Volkswagen bus lowering kit – the “SLAM BAY SPECIAL”

1968-79 Volkswagen bus lowering kit. No short cuts here, no junk or getting almost what you wanted.

No core charge any more, this is an out rite price

Ship in 4-6 weeks. 

This VW bus lowering kit comes with,

Wagenswest built, 4 Inch narrowed, 2 degree raked, adjustable beam, with NEW, OEM style needle bearings . Also included is a torsion spring narrowing tool, plus Wagenswest built, 2.5 inch dropped spindles. And for the rear Wagenswest built, 3.25 Horseshoe rear drop plates, Or upgrade to the 4.5 rear drop plates if your are going real low and want to run aftermarket aluminum wheels.

This kit will drop your bus from 3.25 inches lower than stock, to 8 or more inches lower than stock.

Cores. — No cores

When in comes to the torsion springs, you Will need to narrow your own. A Wagenswest spring narrowing tool is included, and narrowing your own torsion springs, instructions are here.

1″ inch raised beam option,

The 1” inch raised beam option is included in our beams with a dual bolt pattern, to aid in getting more of a drop and better ground clearance. Here is the deal with 1968-79 bay window buses; because of the ball joint design, the beam hangs down roughly 1” inch more than split window bus beams do.  So when you install a 1” inch raised beam you gain 1” inch of ground clearance and in effect you turn a set of 2.5” inch dropped spindles into 3.5”inch drops.

This option has a cost, —— wait for it —— you will need to notch / cut above the beam 1”inch higher, you will also need to remove the heater tube over the beam, leave it out – or replace with flex hose. You will also have some cables to move. This is a bit of work but has a big payoff.  The 1”inch raised beams have dual side plate bolt patters so you can bolt them in the stock spot if you chicken out.

Should I use 3.25″ Horseshoe drop plates? Or upgrade to 4.5″ drop plates ?

Rule of thumb,  4.5″ drop plates are for 1968-70 buses.

If you have a 1968-70 bus and you plan on running wide five aftermarket 15″ aluminum wheels, will  need the 4.5″ drop plates. If you have a 1971-79 bus  you are probably ok with the 3.25″ Horseshoe drop plates . The 4.5″ drop plates are not special because they are 1.25″ inches lower then the Horseshoe plates. 4.5″ drop plates are special because they narrow the rear wheel base by a 1/2″ inch per side.

The post Wagenswest 1968-79 Volkswagen bus lowering kit, the “Slam Bay Special” appeared first on Wagenswest.